network printer problem syn_sent

Wired & Wireless network products and technologies

network printer problem syn_sent

New postby sheneiji » 17 Feb 2009 20:44

got this hp printer n2727 through network. however cannot print via network

do the ping
it says:
Ping statistics for 192.XXX.X.XXX:
Packets: Sent = 4, Received = 0, Lost = 4 (100% loss),

do the netstat
it says:

proto address: 192.XXX.X.XXX
state : syn_sent

on / off the printer the problem for the printer also cannot . so how i suppose to solve the problem? :cool:
this DARTH VADER is still NEWBIE.
User avatar
Posts: 38
Joined: 14 Apr 2007 12:20
Location: malaysia

New postby Ramirez » 17 Feb 2009 21:34

if your printer is in an office, it must be USB-linked directly to ONE of the computers in your network. If the pc that hosts the HP printer is not online, then you can't print. Or, in other words, your pc cannot "see" the printer yet because it hasn't been shared.
User avatar
Master Chip'rs
Posts: 633
Joined: 11 Sep 2007 15:54
Location: Ayer Itam, Penang

Re: network printer problem syn_sent

New postby dcheah » 22 Apr 2011 13:00

If you're printer is connecting to the network directly (the printer have it's own NIC built-in) then possible that the NIC module is faulty. This can be replaced, contact HP for more info & pricing.

If the printer is connected to another PC and shared it, then you will need to verify the PC's firewall or any internet security software aren't blocking it. Also when you try to ping, you're actually pinging that PC and not the printer.
Nothing Is Impossible !
Posts: 7
Joined: 22 Apr 2011 12:24
Location: Kuala Lumpur

Return to Networking & Communications

Who is online

Users browsing this forum: No registered users and 1 guest